New customers: 5% off $300+ purchases
RF4 2KC2 1080P 60FPS 2K HDMI Industrial Microscope Camera with Remote Control
RF4 2KC2 1080P 60FPS 2K HDMI Industrial Microscope Camera with Remote Control
The HDMI industrial camera offers the choice between 8 movable horizontal lines or 8 vertical lines, selectable through the menu. It supports a maximum HDMI output resolution of 1920x1080 at 60Hz. For safety purposes, it is important to thoroughly read the operating instructions.
Packaging contents:
- 1 industrial camera host
- 1 12V or 5V DC power supply
- 1 remote controller
- 1 operation manual
Interface and key functions:
Installation:
1. Connect the industrial lens to the CS interface of the camera.
2. Connect the HDMI OUT interface to the display's data line.
3. Connect the 12V DC interface to the 12V or 5V DC power line.
4. The indicator light will turn green after powering on, indicating normal camera operation.
Menu operation:
1. Press the MENU key once to open the main menu.
2. In the main menu, navigate using the ▲/▼ keys to select different submenus.
3. Press the + key to enter the submenu pointed to by the cursor.
4. Use the "+/-" keys to adjust values within the submenu.
5. The default value for image parameters is "automatic white balance." To perform a "one button white balance," set "automatic white balance" to "NO," place a white paper under the lens, and trigger the "one button white balance" item.
Common problems and solutions:
1. Restore factory settings: MENU key -> equipment management -> restore factory settings.
2. One-click white balance: MENU key -> image parameters -> automatic white balance (set to NO) -> trigger the "One click white balance" option.
3. Key usage: Press once to capture an image. Long press for 2 seconds to record (REC flashes on the left of the drive letter), and long press for 2 seconds to end recording.
4. Picture preview key: Press the MENU key twice to enter the picture/video preview interface. Use the "▲/▼/+/-" keys to navigate and preview corresponding pictures/videos.
5. Line color change: MENU key -> function setting -> left and right keys to adjust line color (set to YES) -> exit by using "▲/▼" keys.
6.To fix an incomplete LCD display with black edges, press the AUTO button on the display.
7.If the lens or imaging element has dust, clean it using absolute alcohol or an eyeglass cloth.
Camera parameters:
1. Imaging element: 2k 1/2.8-inch CMOS, effective pixel 1920X1080, frame rate 60 frames/second, definition 900 lines.
2. CS lens interface is used, compatible with any CS interface lens.
3. Power input: +5V to +12V DC. Maximum working current is 400mA at +5V and 200mA at +12V.
No reviews found
LCD Screen Grades
| Condition | Description | LCD | Glass | Flex Cable | Frame | Appearance Intactness |
|---|---|---|---|---|---|---|
| Aftermarket Basic | China LCD | JK | Aftermarket | Aftermarket | Aftermarket | New |
| Aftermarket Standard | Flex Cable Replaced | Original | Aftermarket | Original | Aftermarket | New |
| Aftermarket Selected | Glass Replaced | Original | Aftermarket | Original | Aftermarket | New |
| Original Pulls | Pull From Used Devices | Original | Original | Original | Original | New Alike |
| Original | Original Equipment Manufacturer | Original | Original | Original | Original | New |
In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.
After Market Basic
It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.
After Market Standard
It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.
After Market Selected
The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.
Original Pulls
No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.
Original New
It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.
