New customers: 5% off $300+ purchases
Goot RX-812AS-TD Temperature Controlled Lead-Free Soldering Station
Goot RX-812AS-TD Temperature Controlled Lead-Free Soldering Station
Features:
- New grip is designed for and adapted to ø2.9 mm superfine tip.
- Reaches set temperature within 4 seconds after turning power on.
- 80 W RX-80HRT Tips also available instead of RX-81HRT tip.
- Slide-change tip. Easy to replace a hot tip without any other tools.
- All tips have extra-thick iron plating, to resist erosion by lead-free solder.
Specifications:
| Model | RX-812AS |
|---|---|
| Voltage | 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz |
| Power Consumption | 80 W |
| Power Cord Length | 1.2 m |
| Temperature Setting Range | 50–450°C |
| Ripple temperature | ±5˚C (unloaded) |
| Insulation Resistance | Over 100 MΩ (500 V DC) |
| Applicable Iron Units | Micro-Iron Unit RX-81GAS (included) |
| 80 W Iron Unit RX-80GAS (sold separately) | |
| Soldering Tweezers Unit XST-80 (sold separately) | |
| Accessories | Iron Unit (RX-81GAS) x1 |
| Soldering Iron Stand (ST-22) x1 Iron Tip x1 Iron Tip x1 |
Control Unit:
| Output Voltage | 24 V AC |
|---|---|
| Dimensions | 116 (W) × 105 (H) × 194 (D) mm |
| Weight | 4.8 kg |
Iron Unit:
| Model | RX-81GAS |
|---|---|
| Iron Unit | Micro-Iron Unit |
| Voltage / Consumption | 24 V AC / 72 W |
| Ground Resistance | Less than 2 Ω |
| Leak Voltage | Less than 2 mV |
| Heater | Nichrome heater |
| Cord Length | 1.2 m |
| Length | 149 mm (with RX-81HRT-SB) |
| Weight | 25 g (with RX-81HRT-SB) |
No reviews found
LCD Screen Grades
| Condition | Description | LCD | Glass | Flex Cable | Frame | Appearance Intactness |
|---|---|---|---|---|---|---|
| Aftermarket Basic | China LCD | JK | Aftermarket | Aftermarket | Aftermarket | New |
| Aftermarket Standard | Flex Cable Replaced | Original | Aftermarket | Original | Aftermarket | New |
| Aftermarket Selected | Glass Replaced | Original | Aftermarket | Original | Aftermarket | New |
| Original Pulls | Pull From Used Devices | Original | Original | Original | Original | New Alike |
| Original | Original Equipment Manufacturer | Original | Original | Original | Original | New |
In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.
After Market Basic
It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.
After Market Standard
It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.
After Market Selected
The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality.
Original Pulls
No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.
Original New
It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F.
| Sort by Price | Sort by Availability | Sort by CODE | Sort by Option |
|---|---|---|---|
$37500
|
In stock
|
19078B
|
Option:
|
|
$37500
|
In stock
|
19078
|
Option:
|
|
$37500
|
In stock
|
19078UK
|
Option:
|
|
$37500
|
In stock
|
19078AU
|
Option:
|
