WhatsApp

GOOT Conventional Dispenser Pack Desoldering Wicks

14787
$250
$400 -38%
In stock
365 days
Price in points: 25 points
Weight: 0.010 kg
Delivery
Payment options
Our advantages

GOOT Conventional Dispenser Pack Desoldering Wicks

Feature:

  • Quickly removes unwanted solder when used with a soldering iron.
  • Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
  • To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
  • Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
  • Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
  • Different Size for choose. 


Use:

  • Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
  • Remove the desoldering wick after the solder has been absorbed.
  • Cut off the used section of the wick using nippers.


FOR LEAD-FREE DESOLDERING

Our thin and soft desoldering wire flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load.

GOOT Conventional Dispenser Pack Desoldering Wicks

RMA base flux.

High-quality desoldering wick with braided copper wire, saturated with non-chlorine special flux. Can be used for precision PCBs safely.

GOOT Conventional Dispenser Pack Desoldering Wicks

SPECIFICATIONS

GOOT Conventional Dispenser Pack Desoldering Wicks

Size
CP-1515 Width : 1.5mm
General Information
Brand
Goot
Find similar

No reviews found

LCD Screen Grades

ConditionDescriptionLCDGlassFlex CableFrameAppearance Intactness
Aftermarket BasicChina LCDJKAftermarketAftermarketAftermarketNew
Aftermarket StandardFlex Cable ReplacedOriginalAftermarketOriginalAftermarketNew
Aftermarket SelectedGlass ReplacedOriginalAftermarketOriginalAftermarketNew
Original PullsPull From Used DevicesOriginalOriginalOriginalOriginalNew Alike
OriginalOriginal Equipment ManufacturerOriginalOriginalOriginalOriginalNew


In Union Repair store, we grade our iPhone screen into 5 different types of quality on the basis of different material assembled. The following is the full details of each condition.

 

After Market Basic

It is with widely accept major complaint replacements for original parts, which keeps a right balance between price and quality. It has sustainable supplying chain in China, and all the components of the screen are copy quality. Typically, the LCD screen is from several different factories, the most popular 4 on China market are JK,AUO, LongTeng, and ShenChao. By comparing the brightness and sharpness of the LCD, we found JK is the best quality among them and the second best is AUO. No doubt, the other components on the screen are all copy.

 

After Market Standard

It is better than After Market Basic cause it comes with original laminated flexes and the LCD panel. Other components like touch panel, frame(hot pressed), backlight, polarize lens, and OCA is all copy from different factories.

 

After Market Selected

The core components (like LCD and flexes) is 100% original pulled from used iPhone while the frame and touch panel is copy. The touch panel and frame come together with cold pressed glue and assembled together with the LCD by the capable third-party factory which keeps its excellent quality. 

 

Original Pulls

No doubt, it is tear down from used iPhone with all the parts 100% original and working perfectly just like an original new screen, it has whatever the original new screen has. The only complaint about this quality is that some of the displays are with 1 or 2 scratches but still be welcome by our critical customers who are requiring good quality.

 

Original New

It is 100% original from Apple-authorized factories like Toshiba, Sharp, and LG. We get this kind of screen from the first level dealer. The touch panel of the screen is oleophobic coated which prevents from fingerprints when using your iPhone. And starting with iPhone 7g, the backlight from different authorized factories comes with a different code. Backlight from Sharp has the code begins with DKH/CON, from Toshiba begins with C11/F7C/FZQ, from LG begins with DTP/C3F. 

 

 


Column filling
Sort by Price Sort by Availability Sort by CODE Sort by Size
$250 $400
In stock
+
14787
Size:
CP-1515 Width : 1.5mm
$250 $400
In stock
+
14788
Size:
CP-2015 Width : 2.0mm
$250 $400
In stock
+
14789
Size:
CP-2515 Width : 2.5mm
You may be interested
  • Similar products
  • Also bought
  • Recently Viewed
 
Fast and high quality delivery

Our company makes delivery all over the country

Quality assurance and service

We offer only those goods, in which quality we are sure

Returns within 30 days

You have 30 days to test your purchase